Compression in a diesel engine is essential for effective and efficient performance. And when compression is lacking, damage can result. That’s why it’s imperative to know whether your engine’s compression is correct.
With a simple diesel engine compression test, it’s possible to spot compression problems before they get worse. Here’s information on these tests and how to decide if it’s time to perform one.
When should you get an engine compression test?
Diesel engine compression tests aren’t a preventive measure, but are performed if you’re having issues with your machine. If your vehicle is underperforming or experiencing a combination of the issues below, consider a diesel engine compression test.
- Starting problems unrelated to weather or outdoor temperature
- Poor fuel economy or increased oil consumption
- Blue smoke
- Unexplainable loss of power
- Excessive crank case pressure
LEARN MORE: 3 DIESEL ENGINE PROBLEMS THAT MIGHT NOT BE WHAT YOU THINK
How do diesel engines compression tests work?
Within a diesel engine, pistons move in a vertical motion, sucking in air as they go. This movement creates the heat needed to ignite fuel, ultimately powering the engine.
When you bring your vehicle in for a compression test, a mechanic places a gauge into each of the cylinders to read how much pressure the engine is producing when the engine turns over.
Generally, each cylinder should have 300 to 500 PSI, and all cylinders in a single engine should measure within 10 percent of each other. If the compression in the engine is too low, too high or deviates too drastically from one cylinder to the next, you likely have internal damage to your engine.
LEARN MORE: HOW TO KEEP HIGH-MILEAGE FLEET VEHICLES ON THE ROAD
Diesel engines require proper compression to deliver high performance. Using superior products like Cenex® PREMIUM DIESEL FUEL and HIGH-QUALITY LUBRICANTS will help protect engines and ensure healthy compression levels. To learn more, contact a CENEX LOCATION NEAR YOU.
Are you maximizing your shop performance? These four tips can help.
Q&A: How to choose the right premium products for construction equipment
Q&A: How to select the right ATF for advanced transmissions
Protect your high-mileage fleet at every mile with synthetics
How to choose a grease for your farm equipment
Construction management 101: The keys to protecting hydraulic pumps and hoses
How to select the best automatic transmission fluid for your fleet
Overcome the elements: how to safeguard your engines on the job site
Prepare for harvest now with quality lubricants
How to boost productivity and cut downtime with diesel fuel storage